Adafruit / SparkFun STEMMA QT Qwiic Adapter 4527, DEV-14495
The SparkFun Qwiic Adapter can make any old I2C board or sensor a STEMMA QT / Qwiic-enabled one. This adapter breaks out the I2C pins from the JST SH connectors to pins that you can easily solder with your favourite I2C-enabled device.
The Qwiic Adapter has two JST SH connection ports, all on the same I2C bus. Four plated through holes are broken out for SCL, SDA, 3.3V and GND. Simple? Yes, and very effective!
Features:
- 2 x JST SH (Qwiic / STEMMA QT) Connection Ports
- Broken-out I2C Pins
Please note, no header is included, some light soldering is required!
Dimensions & Data
- Dimensions: 23.4mm x 8.2mm x 4.7mm
Application
This cable can be used with Qwiic cables, to easily connect sensors and drivers from one board to the other.
Pinout
- Ground (Qwiic Black wire)
- 3.3VDC Power (Qwiic Red wire)
- I2C SDA Data (Qwiic Blue wire)
- I2C SCL Clock (Qwiic Yellow wire)
Despatching and Invoice
UK Business seller - fast dispatch from UK. Full vat invoice supplied with separated VAT content.
SparkFun STEMMA QT Qwiic Adapter 4527 DEV-14495
- Model No.: 2972
- Availability: In Stock
-
£2.39
- Ex VAT: £1.99