This FTDI USB to TTL Serial +5V I/O 4 x 1 Pin Single Header Cable  is a professional, high quality, high speed device which allows a simple and easy way to connect TTL interface devices using a spare USB port.

This USB to TTL has it's I/O lines (Tx, Rx) configured to operate at +5V levels

This FTDI USB to TTL also supports the same features found within the FT232R IC e.g. Supports FT232R FTDIChip-ID™

This FTDI USB to TTL serial adapter cable can fit be used with many different boards & applications which include RS232 Interface Loggers
and also many new designs which require TTL logic.

This USB to TTL has 5V CMOS drive outputs and 5V safe TTL inputs which makes this USB to TTL easy to interface to 5V MCUs.

Also provides 5V output to allow devices to be powered from the USB port.

The Tronix FTDI USB to TTL is made using USB 2.0 specification cable and marked CE & FCC approved.

This FTDI USB to TTL serial cable is 1.8M (nominal) in length with a 2.54mm (0.1") pitch 4 way header (GND, Tx, Rx, VCC +5V)

USB to TTL +5V Serial Cable Pinout below:

Pin Out :  Wire Colour   : Function   
   1       :   Black     :   Ground
   2       :   Orange :   TTL Transmit Tx (output)
   3       :   Yellow   :   TTL Receive Rx (input)
   4       :   Red       :   VCC +5V typical (output)

Model may vary slightly in appearance depending on batch however same high quality FTDI chipset used.

Serial baud: 300 - 2764800bps (3Mbps) at TTL level.

 

Supports OS:

Windows 10, Windows 10 x64
Windows 8/8.1 (32 & 64 Bit)
Windows Server 2008 R2
Windows 7
Windows 7 x64
Mac OS X (Inc Mountain Lion & Mavericks)
Android v3.2+ (No rooting required)
Windows Server 2008
Windows Server 2008 x64
Windows Vista
Windows Vista x64
Windows Server 2003
Windows Server 2003 x64
Windows XP
Windows XP x64
Windows 2000
Windows ME
Windows 98
Linux
Mac OS 9
Mac OS 8
Windows CE.NET (Version 4.2 and greater)


Installation & USB Drivers:
Driver Install Guides
VCP Drivers
D2XX Drivers

Write a review

Please login or register to review

USB to TTL (5V I/O) Serial Cable FTDI (4 x Single Header)

  • Model No.: 2476
  • Availability: In Stock
  • £8.79


  • 5 or more £8.50
  • 10 or more £8.40

Related Products

Part No: 2469

FTDI USB to TTL Serial Cable + Shield (7 Way)

FTDI USB to TTL Serial Cable + Shield (7 Way)

This FTDI USB to TTL Serial Cable (TRX1400) is a professional, high quality, high speed device wh..

£8.20 £8.49

Part No: 4130

DACIO 300 - High Speed RS232 Input / Output Module 5V I/O

DACIO 300 - High Speed RS232 Input / Output Module 5V I/O

The DACIO 300 series modules are powerful, ultra low power consumption, microcontroller (MCU) bas..

£28.95

Part No: 2473

FTDI USB to TTL (3.3V I/O) Serial Cable (6 Way OEM FTDI TTL-232R-3V3 Cable)

FTDI USB to TTL (3.3V I/O) Serial Cable (6 Way OEM FTDI TTL-232R-3V3 Cable)

This FTDI USB to TTL (3.3V I/O) Serial Cable (FTDI TTL-232R-3V3 OEM) is a professional, high qual..

£8.79

Part No: 4415

RS232 Male to TTL (3.3V Signal) Converter Kit - DTE Version - Kit Version

RS232 Male to TTL (3.3V Signal) Converter Kit - DTE Version - Kit Version

RS232 Male to TTL Level Converter/Module (3.3V Signal) Breadboarder (DTE Mode) - KIT T..

£3.98

Part No: 4132

USB Input Output Module - DACIO 300 - Starter

USB Input Output Module - DACIO 300 - Starter

This is a DACIO Quick Starter Board based on the DACIO 300 series modules. You shall need to ..

£3.99 £4.99

Part No: 2475

USB to TTL (3.3V I/O) Serial Cable FTDI (3 x 1 Pin Header)

USB to TTL (3.3V I/O) Serial Cable FTDI (3 x 1 Pin Header)

This USB to TTL 3 x 1 Pin Header has GND, Tx and Rx Lines and it's I/O lines (Tx, Rx) are configu..

£8.79

Part No: 4133

DACIO 303 - High Speed RS232 Input / Output Module 3.3V I/O

DACIO 303 - High Speed RS232 Input / Output Module 3.3V I/O

The DACIO 300 series modules are powerful, ultra low power consumption, microcontroller (MCU) bas..

£24.95 £28.95

Tags: 2476, usb to ttl 5v 4 way, 4 way usb to serial ttl, ftdi usb to ttl,